Filter
Top Products
93
In case of difficulty
Knowledge sections
Maintenance
Reference
Maintenance of the unit
When the front panel or case becomes dirty, wipe with a
soft, dry cloth. Do not use thinner, benzine, alcohol, etc.
for these agents may cause discoloration.
Do not use contact cleaners because it could cause
a malfunction. Be specially careful not to use con-
tact cleaners containing oil, for they may deform the
plastic component.
In regard to contact cleaner
Condensation (of dew) may occur inside the unit when
there is a great difference in temperature between this
unit and the outside.
This unit may not function properly if condensation oc-
curs. In this case, leave the unit for a few hours and re-
start the operation after the condensation has dried up.
Be specially cautious against condensation in the fol-
lowing circumstances:
When this unit is carried from one place to another
across a large difference in temperature, when the hu-
midity in the room where this unit is installed in-
creases, etc.
Caution on condensation Memory backup function
Stored contents which are cleared immediately when
power plug is unplugged from power outlet
Clock display
Stored contents which are cleared in at least a day after
power plug is unplugged from power outlet :
"on/standby" status (ON or STANDBY), Input selec-
tion, Volume control value, Tone control levels, AUX
input level, Setting auto power save, Setting dimmer
Receiving band, Frequency, Preset stations, Auto/
mono setting, Timer setting contents
1 Remove the DVD (MP3, VCD, CD) or MD
from the unit.
2 Press the MD 6 key.
3 Press the DVD/CD 6 key.
4 Wait for some time and verify that the dis-
play becomes as shown in the figure.
5 Wait a few seconds and turn the unit OFF.
Note related to transportation and movement
Before transporting or moving this unit, carry out the
following operations.
NO DISC
DMNO CD IS
Important Items