Filter
Top Products
Introduction
67
Convenient Functions
(Continued)
Using the Timers
Press once to display "REC TIMER" and
then press . In the display window, and
"REC" will have disappeared. When REC Timer is
finished, these displays will also disappear.
The settings for REC Timer are recorded in the
memory. Press once to display "REC
TIMER" and then press . The settings details
will be displayed one by one, after which and
"REC" will be displayed.
NOTE
• When the power plug is disconnected or the power
is cut, the recording timer settings may be lost. If
the settings are lost, set the clock and recording
timer again.
This operates at the same time every day, like an
alarm clock.
1 Prepare the sound source you
want to play back.
2 Press four times to go to the
start time setting display for DAILY
TIMER.
3 Press , or to set the
starting time and ending time.
• You can use the number buttons to set the
playback time. Refer to "Using the number
buttons" ( page 19).
• For setting the clock, refer to "Setting the
Clock" ( page 19).
Entering the "hour" → → Entering the
"minute" →
Canceling the recording timer
Activating the recording timer again
DAILY Timer (Alarm Timer)
Disc Make sure that a disc is loaded.
( page 24)
MD
Insert an MD. ( page 45)
Radio Preset the radio station whose broadcast
you want to listen to. ( page 22)
Other
equipment
Follow the operation manual for the
equipment.
NX-DV3[UJ]-05.fm 67 ページ ２００４年１２月２８日 火曜日 午後４時１３分