Filter
Top Products
Introduction
53
(Continued)
Recording Sound to MDs
(Excluding DVD VIDEOs)
Before proceeding to step 6, start
playback of the track you want to
record.
• Pressing in step 6 returns playback to
the beginning of the track, and only that
track is recorded.
• This one-track recording is not available for
DVD VIDEOs.
■When recording CDs/VCDs/SVCDs/DVD
VIDEOs (For a DVD VIDEO: while the disc
is paused)
Before proceeding to step 6, select the
starting track or chapter number by
pressing or .
■When recording DVD AUDIOs/MP3s/
WMAs
Before proceeding to step 6, select the
group number by pressing or
, and then select the track
number by pressing or .
Before performing step 1 on page 51,
program the tracks you want to record
( page 47).
•
Select normal speed recording ( step 5
on page 52).
When you select "×5 SPEED" and proceed
to step 6, "CANNOT REC × 1 REC ONLY"
appears in the display window and record-
ing does not start.
Press .
• Each time you press , the display tog-
gles as follows.
NOTE
• The recorded sound level is automatically adjusted.
• Sound-synchronized recording is employed for
recording sound from other equipment (AUX).
With sound-synchronized recording, this product
automatically identifies sound signals from the
sound source and starts recording. When sound
from the sound source pauses for 30 or more
seconds, this product automatically quits record-
ing. The blank time between the last recorded
track and the next recorded track is approxi-
mately 2 seconds.
Recording Only One Track
from a Disc
Recording the Second or
Subsequent Track to the Last
Track from a Disc
Program Recording from a
Disc
Changing the Display in the
Display Window during
Recording
Recording Sound from Radio
or Other Equipment
Clock display
NX-DV3[UJ].book 53 ページ ２００４年１２月２８日 火曜日 午後２時３７分