Filter
Top Products
22
Basic Operations/Listening to Radio Broadcasts
Listening to Radio Broadcasts
This product can receive FM and AM radio broad-
casts.
CAUTION
• Set the remote control mode selector to
AUDIO before using the number buttons.
Some countries space AM stations 9 kHz apart,
and other countries use 10 kHz spacing.
On the main unit ONLY:
■When the main unit is turned off
To select 10 kHz spacing, while holding down
on the main unit, press on the main unit to
turn on the power. "AM 10 kHz" appears in the
display window.
To select 9 kHz spacing, while holding down on
the main unit, press on the main unit to turn
on the power. "AM 9 kHz" appears in the display
window.
NOTE
• If the spacing is switched, the memory in which the
radio stations were stored will be erased.
1 Press repeatedly to select
"FM" or "AM".
Example: Display while an FM radio broadcast
is received
2 Press or repeatedly to
select a radio station (frequency).
• You can also select a radio station using the
automatic tuning.
• When the main unit has received an FM
stereo broadcast, "ST" lights up.
NOTE
• If an FM stereo broadcast is difficult to hear
because of noise, you may be able to hear more
easily by pressing to switch the sound to
monaural reception. In this case, "MONO" lights up.
To return the sound to stereo reception, press
again or select another FM radio station.
Setting the AM Tuner Spacing
FM/AM
Selecting a Radio Station
( page 23)
Automatic tuning:
Hold down or until the frequency
starts changing, and then release the but-
ton.
When the main unit has received a broad-
cast, the frequency automatically stops
changing.
To quit the function while searching for a
broadcast, press or .
NX-DV3[UJ].book 22 ページ ２００４年１２月２８日 火曜日 午後２時３７分