JVC NX-DV3 Stereo System User Manual


 
20
Press (or on the main unit).
• With the power off, pressing either button
also turns on the main unit. The function
assigned to the button starts working at the
same time.
Remote control:
Main unit:
NOTE
Cooling fan is built into the main unit for emitting
generated heat. The internal cooling fan automati-
cally rotates and stops.
Press .
• You can also adjust the volume by pressing
on the main unit.
NOTE
You can adjust the volume within the range of 0 to
40.
Press .
• "FADE MUTING" appears and the volume
reduces to "0".
• To return to the previous volume, press
again.
Press .
• Each time you press , AHB PRO
function toggles between "ON" and
"OFF".
• While AHB PRO function is activated,
"AHB PRO" is displayed in the display
window.
• "AHB PRO" stands for "Active Hyper
Bass PRO".
Clear Voice function allows you to easily under-
stand the dialog of DVD videos even with the vol-
ume turned down.
Press .
• Each time you press , Clear Voice func-
tion toggles between "ON" and "OFF".
• While Clear Voice function is activated, is
displayed in the display window.
NOTE
This function cannot be used when the sound
source is radio.
This function is effective when the center chan-
nel signal exists with surround sound, or when
the sound is set to Surround (other than ALL CH
ST.) even with stereo sound ( page 39).
Performing the recording operation deselects
Clear Voice function.
1 Press repeatedly to select
"BASS" or "TREBLE".
2 Press or to adjust the
sound quality.
• You can adjust the sound quality within the
range of -5 to +5.
• The display returns to the sound source dis-
play in a few seconds.
Turning On/Off the Main Unit
Adjusting the Volume
Temporarily Turning Off the
Sound (FADE MUTING)
Emphasizing Heavy Bass
Sound (AHB PRO)
Using Clear Voice Function
Adjusting Bass/Treble Sound
NX-DV3[UJ].book 20 ページ 2004年12月28日 火曜日 午後2時37分