Filter
Top Products
Introduction
17
(Continued)
Connections
CAUTION
• Connect the main unit directly with a TV (or a
monitor) without routing through a VCR. Otherwise
it may cause picture distortion while playing back.
(Such picture distortion is caused by a copy
protection system, and thus it is not a malfunction.)
Also, if the main unit is connected to a TV with a
built-in VCR, there may be picture distortion during
playback.
NOTE
• You need to set "MONITOR TYPE" in the
"PICTURE" menu correctly according to the aspect
ratio of your TV. ( page 41)
You can enjoy pictures of better quality using the
following cord instead of the supplied video cord.
You can enjoy better quality pictures than when
using the S-video cord.
CAUTION
• Use one of either the S-video cord or the compo-
nent video cord. If both cords are used, pictures
may not be played back properly.
NOTE
• In order to enjoy pictures with the progressive
mode ( page 31), the TV is required to have
progressive video input.
• If the component video input jacks of your TV are
BNC type, use a plug adapter (not supplied) to
convert the plugs.
Connect all necessary parts before connecting the power plug.
Connecting with a TV
When a Clearer Picture Is
Desired
TV
Supplied video cord
Main unit
(rear view)
VIDEO IN
Main unit
Connecting directly
TV
(or monitor)
VCR
Connecting by using the S-video cord
TV
M
a
i
n un
it
(rear view
)
S-video cord
(not supplied)
Connect the ends of S-video cord making
sure that each end matches its compatible
terminal.
Connecting by using the component
video cord
TV
Main unit (rear view)
Component video cord
(not supplied)
NX-DV3[UJ].book 17 ページ ２００４年１２月２８日 火曜日 午後２時３７分