Filter
Top Products
14
Connections
1 Set up the AM antenna (supplied).
2 Connect the antenna cord.
3 Turn the AM loop antenna to find
the best position for radio
reception.
Place the AM loop antenna as far
from the main unit as possible.
• Do not place the AM loop antenna on a
metallic table or close to a TV, computer, or
other electric appliances. Doing so may
affect radio reception.
■When radio reception with the supplied AM
loop antenna is poor
Stretch out the FM antenna to the best position for
radio reception, and then fix it with adhesive tape.
■When radio reception with the supplied FM
antenna is poor, or when using a communal
antenna
When using an antenna other than those
supplied with this product, refer to the operation
manuals for the antenna for details of
connection.
Connect all necessary parts before connecting the power plug.
Connecting the Antennas
Connecting the AM antenna
Insert the tab into
the slot.
Main unit (rear view)
When insulation covers the tips
of the antenna cord, twist and
pull off the insulation.
Black White
Vinyl-covered wire: 3 - 5 m
(not supplied)
Twist together vinyl-
covered wire and the AM
loop antenna cord.
Stretch out the vinyl-
covered wire
horizontally, preferably
in a high place such
as above a window or
outdoors.
Connect the AM loop
antenna cord to the
main unit together with
the vinyl-covered wire.
Main unit (rear view)
When positioning the antennas, find the best position for reception while listening to an actual radio program
(refer to "Listening to Radio Broadcasts" ( page 22)).
Connecting the FM antenna
Main unit (rear view)
FM antenna
(supplied)
Main unit
(rear view)
Antenna cord
(not supplied)
Communal
antenna terminal
or
Outdoor FM antenna
(not supplied)
Coaxial cable
(not supplied)
NX-DV3[UJ].book 14 ページ ２００４年１２月２８日 火曜日 午後２時３７分