Filter
Top Products
Introduction
51
Recording Sound
Recording Sound to MDs
• It may be unlawful to record or playback
copyright material without the consent of the
copyright owner.
• Long Time Stereo Playback (MDLP) can be
utilized on this unit. This allows you to record
original stereo sound for two times or four times
longer than the designated period of time.
• You can record tracks having different MDLP
modes onto an MD.
• You cannot use the monaural extended record-
ing function with this product.
CAUTION
• Do not bump or sway the main unit during MD
recording. Be especially careful while "WRITING" is
displayed. Such movement may interfere with MD
playback.
• You cannot play back tracks recorded in LP2 or
LP4 with audio equipment that is not compatible
with MDLP. When you attempt playback, "LP: "
appears in front of the track title, and the main
unit does not produce any sound. When you play
back tracks recorded in LP2 or LP4 with audio
equipment that is compatible with MDLP, "LP: "
does not appear.
To activate or cancel the "LP: " indicator, press
. (See below)
Press .
• Each time you press , the display toggles
as follows.
• You can record up to 254 tracks to an MD. If you
try to record 255 or more tracks, "DISC FULL"
appears.
• When you use a partially-recorded MD, this
product searches for the blank portion and
records the new tracks to that portion.
Unlike cassette tape recording, you cannot
record over old tracks on an MD.
• Changing in sound volume and quality on this
product during recording does not affect the
recorded sound.
• Sound from a CD is recorded as digital signals to
an MD. Sound from the radio or AUX is con-
verted from analog signals to digital signals dur-
ing recording.
• When you record a disc, track marks are auto-
matically inserted between tracks. However,
track marks may not be inserted when a DVD
VIDEO or DVD AUDIO is recorded.
Things You Should Know
about MD Recording
"LP: " indicator setting
: For deleting "LP: " from the track
title.
: For adding "LP: " to the track title.
CD-R/CD-RW recording
• When you record sound from a CD-R or CD-RW
onto an MD, pressing may display "SCMS
CANNOT COPY" in the display window, and
digital recording may not be available.
In such a case, set the recording speed to
normal, hold down for 4 or more seconds.
While ”ANALOG REC?” is displayed, press
once again to select analog recording.
NX-DV3[UJ].book 51 ページ ２００４年１２月２８日 火曜日 午後２時３７分