Filter
Top Products
54
1 Select a sound source.
2 Insert an MD for recording.
• Confirm the MDLP, "LP: " indicator and
group recording settings. ( pages 51
and 52)
• Close the write protect knob on the MD
( page 72).
3 Hold down on the main unit for
approximately 4 seconds to dis-
play the track mark options.
4 While the track mark options are
displayed, press on the main
unit to select a track mark option.
• Each time you press , the display tog-
gles as follows.
5 Press on the main unit.
Example: Display while FM radio broadcast is
recorded
• When recording the sound from other equip-
ment, wait until "AUX → MD" appears, and
then start playback of the connected equip-
ment. Recording automatically starts when
sound is input to the main unit.
You can also start recording by pressing
.
With this method, even when sound from
the connected equipment pauses for 30 or
more seconds, the main unit does not auto-
matically quit recording.
Press .
Press .
• Each time you press , the display tog-
gles as follows.
For the locations of remote control
buttons, refer to page 51.
Sound source Operation
Radio
broadcast
Select the radio station whose broad-
cast you want to record ( page
22).
Sound from
other equip-
ment (AUX/
AUX-DIGITAL
1/2)
Press repeatedly to select AUX
or AUX-DIGITAL 1/2, and prepare
playback on the other equipment
( page 50).
: When no sound is produced for 3
or more seconds, a track mark is
automatically set. You can also
insert a track mark by pressing
.
: Each time you press during
recording, a track mark is set
(initial setting).
: Track marks are automatically set
in 5-minute intervals.
Quitting Recording
Changing the display in the display
window during recording
Clock display
NX-DV3[UJ]-04.fm 54 ページ ２００４年１２月２８日 火曜日 午後４時１９分