Filter
Top Products
62
English
CD/MD Messages
For CD:
Message
CANNOT PLAY
CD1* NO DISC
(* Selected disc number appears.)
CANNOT REC
x1 REC ONLY
Message
BLANK DISC
CANNOT ENTRY!
CANNOT FORM!
CANNOT GROUP!
CANNOT JOIN
CANNOT LISTEN
CANNOT REC
x1 or x2 ONLY
CANNOT TITLE
DISC FULL
DISC
PROTECTED
EMERGENCY
STOP
GROUP FULL
GROUP TRACK
HCMS CANNOT
COPY
LOAD ERROR
LOW TEMP
CANNOT COPY
Signification
You are trying to play back a unplayable
CD or a CD with scratches, etc.
• No disc is on the disc tray.
• You are trying to play back an
unfinalized CD-R/RW.
You are trying to record a CD onto a
MD and a tape at the same time using
x2 or x4 speed recording.
Signification
The disc is blank.
The track has already been in the
selected group.
You are trying to form a new group
including other groups.
There is no more space for storing
information concerning MD group.
You are trying to join tracks (shorter
than 8 seconds) or groups which cannot
be joined.
You are trying to listen to the sound
during high-speed recording.
You are trying to record a CD in
Program Play or Random Play using x4
speed recording.
You are trying to enter the title on the
MD which already has over 1792
characters in total.
There is no more space on the MD or
there are over 254 tracks.
MD is write-protected.
A malfunction has occurred during
recording.
You are trying to form over 99 groups.
You are trying to make a group by
including a track which belongs to
another group.
You are trying to re-record a song that
has been recorded once at high speed,
before 74 minutes have passed after its
first recording.
MD is not loaded correctly.
The room temperature is too low to
record using x4 speed recording.
Solution
Change the CD.
• Place a disc on the disc tray.
• This is not a malfunction. You can
play back “finalized” CD-R/RWs.
This is not a malfunction. Select normal
recording speed (x1). (See page 30.)
Solution
Change the MD if you want to enjoy
playback.
This is not a malfunction. (See “Adding
a Track to a Group—ENTRY GR” on
page 40.)
This is not a malfunction. (See “Forming
a Group—FORM GR” on page 39.)
You cannot form a group any more on
the MD.
This is not a malfunction.
(See pages 42 and 48.)
This is not a malfunction.
You cannot listen to the sound during
high-speed recording.
This is not a malfunction. Select other
recording speeds. (See page 30.)
This is not a malfunction. (See
“Assigning Titles to an MD” on page
51.)
Use another recordable MD or erase
some tracks.
Unprotect the MD or use another.
(See page 28.)
Stop playback, and eject the MD and re-
insert it.
This is not a malfunction. There can be
up to 99 groups on an MD.
This is not a malfunction. (See
“Forming a Group—FORM GR” on
page 39.)
An internal timer works to protect
copyrights. Wait for 74 minutes or
more, then start recording.
Eject the MD and re-insert it.
This is not a malfunction. You can record
using x4 speed recording within 5˚C – 35˚C.
For MD:
EN59-64_UX-J55MD[UB]f.p65 7/1/03, 4:43 PM62