Filter
Top Products
32
English
4
Press MD REC.
The REC (MD recording) indicator starts
flashing on the display.
When the source is “FM” or “AM,” recording starts.
When the source is “TAPE,” playback and recording
starts—Synchronized Recording.
When the cassette player stops, recording also stops
automatically.
When the source is “AUX,” starts playback after “AUX
= MD” appears on the display.
To stop recording, press 7.
“WRITING” flashes on the display and the unit beeps for a
while if the key-touch tone is activated (see page 10).
When recording from the external equipment
Recording starts automatically when the source sound comes into the unit,
and stops automatically if no sound comes into the unit for about 30 seconds
(Sound Synchronized Recording).
To change the information shown on the display
On the remote control ONLY:
Press DISP/CHARA.
• Each time you press the button, the
information on the display changes as
follows:
* When group recording is not activated, “– –” will appear on the display.
Recording Other Sources onto an MD
1
Prepare the source to record from.
To record from FM/AM broadcasts:
1) Press FM/AM/AUX (or FM/AM on the unit) to
select either “FM” or “AM.”
2) Tune in to a preset station you want (see page 14).
To record from a tape:
1) Insert a cassette into the cassette loading slot.
• If the current playing source is not “TAPE,” press
TAPE 2 3, then 7 before going to the next step.
2) Press REV.MODE to select Reverse
Mode (see page 26).
To record from external equipment:
Press FM/AM/AUX (or AUX/DVD on the unit) to select
“AUX” and prepare the external equipment to play.
• Adjust the audio input level if necessary (see page 27).
• For operation of the external equipment, see the
manuals supplied with it.
2
Insert a recordable MD into the MD loading
slot.
• Set the MD recording length mode, “LP:”-prefix
addition mode, and group recording mode (see “Setting
MD Recording Modes” on page 30).
On the remote control ONLY:
3
Press CD REC MODE to select
track mark entry mode.
• Each time you press the button, entry mode
alternates between auto and manual entry:
MANUAL TRK REC: Separates tracks manually by
adding track marks at the places
where you want.
• Press SET to add a track mark
while recording.
AUTO TRK REC: The unit automatically separates
and put a track mark if there is a
silence of 3 seconds or more
between tracks.
• By pressing SET, you can also
enter a track mark manually.
* See “About the track marks” on page 28 for details.
AUX/DVD
FM/AM
FM/AM
/AUX
(On the remote control) (On the unit)
DISP/CHARA
Source indication
MD track number MD group number*
SP
REC
MD
x1
GROUP
SP
REC
MD
x1
GROUP
CD REC
MODE
MANUAL TRK REC
AUTO TRK REC
AUX/DVD
FM/AM
FM/AM
/AUX
(On the remote control) (On the unit)
REV.
MODE
MD
REC
Ex.: When recording a tape using LP2 and Group recording.
TAPE
REC
MD
x1
GROUP
LP
2
Ex.: When you record an FM broadcast.
Remaining recording time
EN28-36_UX-J55MD[UB]f.p65 7/1/03, 4:41 PM32