Filter
Top Products
43
English
Moving a Group—MOVE GR
This function allows you to move a group.
Once a group is moved, the tracks and the other groups are
renumbered.
• To stop any time during the editing process below before
step
8
, press GROUP TITLE/EDIT.
1
Insert an MD you want to edit into the MD
loading slot.
On the remote control ONLY:
2
Press GROUP TITLE/EDIT
repeatedly until “MOVE GR ?”
appears on the display.
• If you want to stop this editing process, press CANCEL.
3
Press SET.
• If the loaded MD has only one or no group, you cannot
go to the following steps.
• During playback:
The group number of the currently playing track will
appear. If the track does not belong to any group, the
group number will be indicated as “– –.”
4
Press GROUP SKIP ¢ or GROUP SKIP
4 while holding SHIFT to select the group
you want to move.
GROUP TITLE
/EDIT
SET
GROUP SKIP GROUP SKIP
SHIFT
5
Press SET.
• To cancel the setting, press CANCEL, then repeat from
step
4
.
6
Press GROUP SKIP ¢ or GROUP SKIP
4 while holding SHIFT to select the
position where you want to move the group
to.
7
Press SET.
• To cancel the setting, press CANCEL, then repeat from
step
4
.
8
Press ENTER.
“EDITING” appears on the display. Then
“WRITING” and the REC (MD recording)
indicator flash while the editing you have
made is being recorded on the MD.
SET
GROUP SKIP GROUP SKIP
SHIFT
ENTER
SET
Ex.: When group 3 is selected.
Ex.: When group 3 is moved to group 10.
EN37-45_UX-J55MD[UB]f.p65 7/1/03, 4:46 PM43