Filter
Top Products
48
English
5
Press SET.
• To cancel the setting, press CANCEL, then repeat from
step
4
.
6
Press ENTER.
“EDITING” appears on the display. Then
“WRITING” and the REC (MD recording)
indicator flash while the editing you have
made is being recorded on the MD.
To divide the joined tracks, see the DIVIDE function on
page 47.
• If “CANNOT JOIN” appears in step
5
You cannot join the following tracks.
– Tracks recorded using different recording length modes (SP, LP2, LP4).
(See page 30.)
– Digital-recording tracks and analog-recording tracks.
– Tracks recorded using monaural long recording method (not possible on
this unit) and stereo-recording tracks.
• When the track belongs to a group
If the preceding track of two tracks you want to join belongs to a group,
the newly joined track will belong to that group. On the other hand, if the
preceding track does not belong to any group, the newly joined track will
not belong to any group even if the succeeding track belongs to a group.
Joining Two Tracks—JOIN
This function allows you to join two adjacent tracks into one
track.
When the tracks have their own titles, the title of the
preceding track is reassigned to the newly joined track.
Once two tracks are joined, the other tracks and/or the groups
are renumbered.
• To stop any time during the editing process below before
step
6
, press TITLE/EDIT.
1
Insert an MD you want to edit into the MD
loading slot.
On the remote control ONLY:
2
Press TITLE/EDIT repeatedly
until “JOIN ?” appears on the
display.
• If the loaded MD has no track, “JOIN ?” will not
appear.
• If you want to stop this editing process, press CANCEL.
3
Press SET.
• If the loaded MD has only one track, you cannot go to
the following steps.
4
Press ¢ or 4 to select
the two adjacent tracks you
want to join.
• You can also select the tracks
using the number buttons*. In this case, the selected
track starts playing repeatedly.
* Select the succeeding track of two tracks when you use the number
buttons.
Ex.: When tracks 2 and 3 are selected.
TITLE/EDIT
SET
GROUP SKIP GROUP SKIP
SET
ENTER
Continued
EN46-53_UX-J55MD[UB]f.p65 7/1/03, 4:45 PM48