Filter
Top Products
51
English
1
Insert an MD you want to edit into the MD
loading slot.
2
Enter the unit into the title entry mode.
For the disc and track title:
Press TITLE/EDIT.
• During stop mode:
Disc title entry screen appears on the
display.
• During play mode:
Track title entry screen appears on the display.
For the group title:
Press GROUP TITLE/EDIT.
Group title entry screen appears on the
display.
• If the loaded MD has no group, you cannot go to the
following steps.
3
Press or to change the
title entry mode.
• Each time you press the button, the
title entry mode changes as follows:
For the disc and track title:
For the group title:
4
Press SET to enter the unit into the
selected title entry mode.
Assigning Titles to an MD
You can assign a name to each MD, to each group and to
each track using alphabetic characters (uppercase and
lowercase), symbols and numerals. Once a title is assigned, it
is displayed for your confirmation.
• You cannot edit titles composed of more than 61 characters.
About the number of characters entered for an MD
The total number of characters that you can enter for an MD is 1792. The
maximum number that you can enter for a disc/track title is 61.
(However, the actual number you can enter may be slightly less than the
maximum numbers due to the MD limitations—see page 61.)
• A space can be counted as one character.
• When the stereo long-hour recording (LP2 or LP4, see page 30)
method is used for recording, the maximum number you can enter for a
track title is automatically reduced since “LP:” and a space are
automatically added to the beginning of the track title. Consequently
this reduces the total number of characters you can enter for an MD.
Ex.: You can enter up to 10 characters for each track if an MD is
composed of 120 tracks recorded using the stereo long-hour
recording method.
In the following example, the process is explained from the
very first—that is, inserting a disc. If you have already started
recording or playing, start from step
2
.
• You can edit titles during playback (in Normal Play).
• To exit from the title entry screen any time during the
process, press TITLE/EDIT or GROUP TITLE/EDIT
repeatedly.
Ex.: When the disc has no title.
Character entry position
Character set
TITLE/EDIT
GROUP TITLE
/EDIT
10 +10
SET
DISC TITLE? 1 TITLE? 2 TITLE?
3 TITLE?
The last
track title
GR– – TITLE? GR 1 TITLE?
GR 2 TITLE?
The last
group title
EN46-53_UX-J55MD[UB]f.p65 03.7.10, 0:02 PM51