Filter
Top Products
44
English
Ungrouping Tracks—UNGROUP
This function allows you to dissolve a group.
You cannot erase the tracks using this function.
Once tracks are ungrouped, the other groups are renumbered.
• To stop any time during the editing process below before
step
6
, press GROUP TITLE/EDIT.
1
Insert an MD you want to edit into the MD
loading slot.
On the remote control ONLY:
2
Press GROUP TITLE/EDIT
repeatedly until “UNGROUP ?”
appears on the display.
• If you want to stop this editing process, press CANCEL.
3
Press SET.
• If the loaded MD has no group, you cannot go to the
following steps.
• During playback:
The group number of the currently playing track will
appear. If the track does not belong to any group, the
group number will be indicated as “– –.”
4
Press GROUP SKIP ¢ or GROUP SKIP
4 while holding SHIFT to select the group
you want to dissolve.
GROUP TITLE
/EDIT
5
Press SET.
• To cancel the setting, press CANCEL, then repeat from
step
4
.
6
Press ENTER.
“EDITING” appears on the display. Then
“WRITING” and the REC (MD recording)
indicator flash while the editing you have
made is being recorded on the MD.
Dissolving All Groups—UNGR ALL
This function allows you to dissolve all the groups.
You cannot erase the tracks using this function.
• To stop any time during the editing process below before
step
4
, press GROUP TITLE/EDIT.
1
Insert an MD you want to edit into the MD
loading slot.
On the remote control ONLY:
2
Press GROUP TITLE/EDIT
repeatedly until “UNGR ALL ?”
appears on the display.
• If you want to stop this editing process, press CANCEL.
3
Press SET.
• To cancel the setting, press CANCEL.
4
Press ENTER.
“EDITING” appears on the display. Then
“WRITING” and the REC (MD recording)
indicator flash while the editing you have
made is being recorded on the MD.
SET
GROUP SKIP GROUP SKIP
SHIFT
SET
ENTER
GROUP TITLE
/EDIT
SET
ENTER
Ex.: When group 3 is selected.
Continued
EN37-45_UX-J55MD[UB]f.p65 7/1/03, 4:47 PM44