Filter
Top Products
12
English
Ex.: When you select “BASS.”
Current setting
BASS/
TREBLE
DIMMER
VOLUME
Adjusting the Tone
You can adjust the bass level (low frequency range) and the
treble level (high frequency range) within a range of “–5” to
“+5” only while the unit is turned on.
• This function only affects the playback sound, and does not
affect your recording.
• This function also affects the sound from headphones.
• There is a time limit in doing the following steps. If the setting
is canceled before you finish, start from step
1
again.
1
Press BASS/TREBLE to adjust the
bass or treble level.
2
On the remote control:
Press VOLUME + to increase the
level or press VOLUME – to
decrease the level.
On the unit:
Turn VOLUME + / – control
clockwise to increase the level
or counterclockwise to
decrease the level.
Changing the Display Brightness
You can change the display brightness only while the unit is
turned on.
On the remote control ONLY:
Press DIMMER while the unit is turned on.
• Each time you press the button, the display
brightness changes as follows:
DIMMER 1: The display illumination dims.
DIMMER 2: The display illumination dims and the
blue illumination on the display
disappears.
DIMMER OFF: The display and blue illumination
resumes.
Turning off (on standby) the unit sets the display brightness back to
“DIMMER OFF.”
DIMMER 1
DIMMER 2
DIMMER OFF
VOLUME
+
–
EN09-12_UX-J55MD[UB]f.p65 7/1/03, 4:28 PM12