Filter
Top Products
35
English
To record a single track of a CD/MD during play
On the remote control ONLY:
While playing back a track of a CD or MD
you want to record, press TAPE REC.
The playback of the track is stopped, and the
same track starts playing from the beginning
again. This time, the cassette deck starts recording the track.
• After the track is recorded, both playback and recording
stop automatically.
When you press TAPE REC while pausing a track
Recording starts from that point.
To change the information shown on the display
On the remote control ONLY:
Press DISP/CHARA.
• Each time you press the button, the
information on the display alternates
between the recording indication and the
clock indication.
When recording a disc or an MD
• A 4-second blank is automatically made on the tape before each track. To
record without the blank, press CD 6 or MD 6 twice in step
1
, then
press TAPE REC.
• When the front side of the tape ends in the middle of a track, the recording
on the reverse side starts from the beginning of that track (if the reverse
mode is set to ).
However, if the front side ends within 12 seconds from the beginning of a
track, recording on the reverse side starts from the previous track.
DISP/CHARA
To record from external equipment:
1) Press FM/AM/AUX (or AUX/DVD on the unit) to
select “AUX.”
2) Prepare the external equipment to play.
• Adjust the audio input level if necessary (see page 27).
• For operation of the external equipment, see the
manuals supplied with it.
2
Put a recordable cassette into the cassette
loading slot.
3
Press REV.MODE to select
Reverse Mode.
• Each time you press the button, Reverse
Mode changes as follows:
* will be shown during recording when you select .
4
Press TAPE REC.
The REC (tape recording) and tape direction
indicators start flashing on the display.
When the source is “FM” or “AM,” recording starts.
When the source is “CD” or “MD,” playback and
recording starts—Synchronized Recording.
When the CD or MD player stops, recording also stops
automatically.
When the source is “AUX,” starts playback after “AUX
= TAPE” appears on the display.
• When you select a track by pressing ¢ or 4 before
pressing TAPE REC, recording starts from the selected
track (except when Program Play is selected).
• When recording from an external equipment, start
playback after “AUX = TAPE” appears on the display.
To stop recording, press 7.
REV.
MODE
Recording on
one side.
Recording on both
sides once.
TAPE
REC
TA P E
REC
Ex.: When you record an FM broadcast
TAPE
REC
AUX/DVD
FM/AM
FM/AM
/AUX
(On the remote control) (On the unit)
EN28-36_UX-J55MD[UB]f.p65 7/1/03, 4:42 PM35