Filter
Top Products
10
English
When you unplug the AC power cord or if a power
failure occurs
The clock is reset to “0:00” right away, while the tuner preset stations will be
erased in a few days.
To turn off the unit automatically (Auto Standby)
Using Auto Standby, the unit automatically turns itself off (on
standby) if no sound comes in for about 3 minutes except
when FM, AM, or AUX is selected as the source.
If an operation is done within this 3-minute period, Auto
Standby is canceled temporarily even though no sound comes
in.
• You can also turn off the unit automatically by using the
Sleep Timer. (See page 58.)
On the remote control ONLY:
To activate Auto Standby, press A.STANDBY while holding
SHIFT.
“A.STANDBY ON” and the AUTO STANDBY indicator appear
on the display.
• When no sound comes in, the AUTO STANDBY indicator
starts flashing on the display. About 20 seconds before the
unit turns itself off (on standby), “AUTO STANDBY”
starts flashing on the display.
To deactivate Auto Standby, press A.STANDBY again
while holding SHIFT.
“A.STANDBY OFF” appears on the display for a while and
the AUTO STANDBY indicator goes off.
Turning On/Off the Key-touch Tone
If you do not want the key-touch tone to beep each time you
press a button, you can deactivate it while the unit is turned on.
On the remote control ONLY:
Press BEEP.
• Each time you press the button, the key-touch
tone turns on and off alternately.
AUTO STANDBY indicator
To turn off the clock indication (Power Save)
On the remote control ONLY:
Press DISP/CHARA while the unit is on
standby (off).
“DISPLAY OFF” appears on the display for a
while, then the clock indication goes off.
To turn on the clock indication, press DISP/CHARA again
while the unit is on standby (off).
“DISPLAY ON” appears on the display for a while.
• Pressing DIMMER while the unit is on standby (off) will
also activate the clock indication (see also “To check the
clock time with tones” on page 9).
Turning On the Power and Starts Playback
To turn on the unit, press STANDBY/ON
.
The STANDBY/ON lamp on the unit lights
green.
When you press one of the source selecting buttons, the unit
automatically turns on (and starts playback if the source is
ready).
On the remote control:
On the unit:
• Pressing one of the eject buttons on the unit—CD10 to
CD50, 0 (MD eject) and 0 (TAPE eject)—also turns on
the unit if the disc trays, MD, and cassette are unlocked.
• When you press FM/AM/AUX repeatedly (or AUX/DVD
on the unit) to operate the external equipment, see page 27
and the manuals supplied with it.
To turn off the unit (standby), press STANDBY/ON again.
The STANDBY/ON lamp on the unit lights red.
• The clock time appears on the display if you have set the
built-in clock.
“0:00” will flash on the display if you have not set the
built-in clock.
To set the built-in clock, see “Setting the Clock” on page 9.
• A little power is always consumed even while the unit is on
standby (off).
To switch off the power supply completely, unplug the AC
power cord from the AC outlet.
Continued
STANDBY/ON
CD MD TAPE
FM/AM
/AUX
6 6 23
00
DISC
SELECT
AUX/DVD
FM/AM
‹
/
8
CD
‹
/
8
MD
¤‹
TAPE
DISP/CHARA
SHIFT
SLEEP
A.STANDBY
STANDBYAUTO
BEEP
LP:
BEEP ON
BEEP OFF
EN09-12_UX-J55MD[UB]f.p65 7/1/03, 4:28 PM10