Filter
Top Products
18
English
If Program Play is still activated, you cannot eject the discs.
To open disc trays (eject discs), before or after play, press
PLAY MODE once or twice so that the unit enters another
play mode (Random Play or Continuous Play) before
pressing the disc eject buttons (CD10 to CD50).
To check the program contents
On the remote control ONLY:
Before playing, you can check the
program contents by pressing ¢ or
4.
• ¢: Shows the programed tracks in the programed order.
• 4: Shows them in the reverse order.
• Pressing 4 first time after you have programed
shows the first track in the program.
To modify the program
On the remote control ONLY:
Before playing, you can erase the last
programed track by pressing CANCEL.
Each time you press the button, the last
programed track is erased from the program.
To add tracks to the program before playing, simply select
the disc numbers and track numbers you want to add by
following steps
3
and
4
in Program Play.
To erase the entire program
1
Press 7 to stop playback.
2
Press PLAY MODE once or twice
so that the unit enters another
playback mode (Random Play or
Continuous Play).
3
Press disc eject buttons (CD10 to CD50) on
the unit to eject all the discs used for making
the program.
The program will also be erased, when you unplug the AC
power cord or a power failure occurs.
• If you try to program a 33rd track
“MEMORY FULL” will appear on the display.
• If your entry is ignored
You are trying to program a track from an empty tray, or a track number
that does not exist on the disc.
• If “NO READ” appears on the display
You are selecting the disc that the unit has not yet read. Press DISC UP
or DISC DOWN to select the disc so that its disc information is
shown on the display.
• If the total playing time is 100 minutes or more
The total playing time on the display will not be shown. “– – : – –” will
appear.
Playing at Random—Random Play
The tracks of all loaded discs will be played at random.
• To use Repeat Play (see page 19), press REPEAT after
starting Random Play.
1
Load discs into the 5-CD changer.
• If the current playing source is not “CD,” press CD 6,
then 7 before going to the next step.
On the remote control ONLY:
2
Press PLAY MODE repeatedly
until “CD RANDOM” appears on
the display.
The RANDOM indicator also lights up on the
display.
• Each time you press the button, play mode changes as
follows:
3
Press CD 6.
The tracks are played at random.
Random Play ends when all the tracks are
played once (when Repeat Play is not activated).
To stop during play, press 7.
• Opening a disc tray also stops and cancels Random Play.
To skip the current playing track, press ¢.
To skip back to the beginning of the current track, press 4.
• You cannot go back to the previous tracks.
To exit from Random Play, before or after play, press PLAY
MODE once or twice so that the unit enters another play
mode (Continuous Play or Program Play).
The RANDOM indicator goes off.
• Turning off the unit also cancels Random Play and changes
play mode to Continuous Play.
Continued
RANDOM indicator
GROUP SKIP GROUP SKIP
CANCEL
PLAY
MODE
CD
6
C D
1 2 3 4 5
RANDOM
CD PROGRAM
(Program Play)
CD RANDOM
(Random Play)
Continuous Play
PLAY
MODE
CD10 CD20 CD30 CD4 0 CD50
EN15-19_UX-J55MD[UB]f.p65 7/1/03, 4:30 PM18