Filter
Top Products
31
English
5
Press CD REC MODE to select the
recording mode.
• Each time you press the button, recording
mode changes as follow:
• 1st TRACK REC: Records the first track of all the
loaded CDs (up to 5 discs).
• This allows you to make a
directory of all your favorite CDs.
• CD1* DISC REC: Records the selected CD entirely.
* Selected disc number appears on the display.
• ALL DISC REC: Records all the loaded CDs.
6
Press MD REC when the selected
recording mode in step
5
is still
shown on the display.
The recording starts and the REC (MD
recording) indicator starts flashing on the display.
• When you have selected a track by pressing ¢ or 4
before pressing CD REC MODE in step
5
, recording
starts from the selected track (except when Program
Play mode is selected).
• If you do not select the recording mode in step
5
, the
current CD will be recorded entirely.
• When you have selected Program Play or Random Play
mode, you cannot record using x4 speed recording
(“CANNOT REC x1 or x2 ONLY” will appear).
• You can use x4 speed recording during Program Play or
Random Play to record only the current playing track.
• Recording speed will be “x5” to record an entire CD
whose playing time is more than 28 minutes with “x4”
recording speed selected.
When the CD player stops, the MD recorder also stops
automatically.
To stop recording, press 7.
“WRITING” flashes on the display and the unit beeps for a
while if the key-touch tone is activated (see page 10).
CD REC
MODE
MD
REC
MD operation indicators
The track number on the disc
currently being recorded
Remaining playing
time
Ex.: Track 1 of CD2 is now recorded on an MD using
LP2 and Group recording at normal speed (x1).
Remaining recording time
To record a single track during play or pause
While playing back or pausing a track you
want to record, press MD REC.
The playback of the track is stopped, and the
same track starts playing from the beginning again. This time,
the MD recorder starts recording the track. The REC (MD
recording) indicator flashes on the display.
• After the track is recorded, both the CD player and the MD
recorder stop automatically.
“WRITING” flashes on the display and the unit beeps for a
while if the key-touch tone is activated (see page 10).
To change the information shown on the display
On the remote control ONLY:
Press DISP/CHARA.
• Each time you press the button, the
recording indications, the current track
numbers of both the disc and the MD, and
the clock indication appear in sequence on the display.
* If the loaded MD does not contain any group or more than 99 groups,
“G – –” will appear on the display.
When recording from a CD-R/RW
You cannot make a digital recording from a digital-copied CD-R/RW on an
MD. “SCMS CANNOT COPY” appears on the display and an analog
recording starts (see page 61). The recording speed is automatically set to x1
(normal speed).
If CD REC MODE is used, recording stops automatically if “SCMS CANNOT
COPY” appears on the display.
MD
REC
DISP/CHARA
1st TRACK REC
CD1* DISC REC
ALL DISC REC
C D
x1
REC
1 2 3 4 5
MD
GROUP
LP
2
C D
x1
REC
1 2 3 4 5
MD
GROUP
LP
2
C D
x1
REC
1 2 3 4 5
MD
GROUP
LP
2
Remaining playing time
Remaining recording time
Current CD track number
Current MD track number Current group number*
C D
x1
REC
1 2 3 4 5
MD
GROUP
LP
2
EN28-36_UX-J55MD[UB]f.p65 7/1/03, 4:41 PM31