Filter
Top Products
SETUP
SDP-40
3-40
CAL NOISE ON, OFF
Determines whether bass peak limiters are set with an internal or
external calibration source. When ON is selected, the SDP-40
activates an internal calibration noise signal to set bass peak
limiters. When OFF is selected, the SDP-40 deactivates the internal
calibration noise signal. Setting bass peak limiters requires an
external calibration source such as an audio calibration disc.
L/R LIMITER ON, OFF
Limits low-frequency signals sent to the subwoofer or redirected to
other speakers. When ON is selected, the SDP-40 restricts the
output level of these signals according to the L/R LIMIT ADJ
parameter setting. When OFF is selected, the SDP-40 does not
restrict the output level of these signals, regardless of the L/R LIMIT
ADJ parameter setting.
L/R LIMIT ADJ 75 to 120dB
Specifies the output level restriction the SDP-40 applies to the
Subwoofer L/R output connectors as well as to other Main Zone audio
output connectors to which low-frequency signals are redirected.
When the L/R LIMIT ADJ parameter is selected, it is automatically
set to 75dB. The SDP-40 applies the selected output level restric-
tion when the L/R LIMITER parameter is set to ON.
L/R LIMIT ADJ
BASS PEAK LIMITERSLEVELS CALIBRATIONMANUALSPEAKERSSETUP
L/R LIMITER
BASS PEAK LIMITERSLEVELS CALIBRATIONMANUALSPEAKERSSETUP
CAL NOISE
BASS PEAK LIMITERSLEVELS CALIBRATIONMANUALSPEAKERSSETUP
LFE LIMITER ON, OFF
Limits low-frequency signals sent to the LFE subwoofer or redirected
to other speakers. When ON is selected, the SDP-40 restricts the
output level of these signals according to the LFE LIMIT ADJ
parameter setting. When OFF is selected, the SDP-40 does not
restrict the output level of these signals, regardless of the LFE LIMIT
ADJ parameter setting.
LFE LIMIT ADJ 75 to 120dB
Specifies the output level restriction the SDP-40 applies to the
LFE output connector as well as to other Main Zone audio output
connectors to which low-frequency signals are redirected. When
the LFE LIMIT ADJ parameter is selected, it is automatically set to
75dB. The SDP-40 applies the selected output level restriction
when the LFE LIMITER parameter is set to ON.
LFE LIMIT ADJ
BASS PEAK LIMITERSLEVELS CALIBRATIONMANUALSPEAKERSSETUP
LFE LIMITER
BASS PEAK LIMITERSLEVELS CALIBRATIONMANUALSPEAKERSSETUP