Filter
Top Products
SETUP
JBL
3-24
SYNTHESIS 7CH Speaker Setups
Selecting the CROSSOVER SETUP menu SYNTHESIS 7CH SETUP
option opens the SYNTHESIS 7CH SPEAKER SETUP screen shown
above, which indicates that pressing the arrow button will auto-
matically configure the Main Zone audio output connectors for a
SYNTHESIS 7CH speakers setup.
When the Synthesis 7 Channel SPEAKER SETUP screen opens:
•Press the arrow button to configure the Main Zone audio
output connectors for a SYNTHESIS 7CH speaker setup. The
SYNTHESIS 7CH SETUP menu shown above will open on the
on-screen display.
•Press the arrow button to close the message without
configuring the Main Zone audio output connectors for a
SYNTHESIS 7CH speaker setup.
When a SYNTHESIS 7CH speaker setup is selected, the SDP-40
applies a 80Hz crossover point with a 24dB-per-octave filter to the
Front L/R, Center, Side L/R, and Rear L/R output connectors. The
SYNTHESIS 7CH SETUPSET CROSSOVERSSPEAKERSSETUP
SDP-40 applies a 80Hz crossover point with a 24dB-per-octave fil-
ter to the Subwoofer L/R output connectors.
Setting Crossover Points (continued from page 3-23)
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SETUP
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGERS
LOCK OPTIONS
SPEAKERS
SYNTHESIS 7CH SETUP
!CAUTION!
PRESSING THE V
BUTTON WILL
AUTOMATICALLY CHANGE
THE OUTPUTS TO A
SYNTHESIS
7CH SPEAKER
CONFIGURATION
SYNTHESIS 7CH SETUP
FRONT L/R 80Hz
CENTER 80Hz
SIDE L/R 80Hz
REAR L/R 80Hz
SUB L/R MONO
SUB XOVER 80Hz
LFE OFF
ULTRA2 SUB OFF
BGC N/A
ASA APART
!CAUTION!
SPEAKER SETUP
CUSTOM SETUP
THX SETUP
SPEAKER DISTANCES
LEVELS CALIBRATION
80Hz 80Hz
80Hz 80Hz 80Hz
80Hz 80Hz
80Hz
L
M
SUB
R
C
SL
SR
RL
RR
SYNTHESIS 7CH SETUP