Filter
Top Products
Basic Operation
SDP-40
2-7
When a 5.1-channel analog source is present in the Main Zone
and the INPUT SETUP menu ZONE2 IN or RECORD IN param-
eter is set to DMIX, only the (L) and (R) input
signals are sent to the Zone 2 or Record Zone audio output
connectors.
Input Connector(s) Output Connector(s)
(L) & (R) Front L/R
(C) Center
(SUB) Subwoofer L/R & LFE
(LS) & (RS) Side L/R & Rear L/R
5. Main Zone Audio Output Connectors
Provide analog audio output in the Main Zone. Ten connectors
labeled Front L/R, Center, LFE, Subwoofer L/R, Side L/R, and
Rear L/R are available. Two connectors labeled Aux L/R are
provided for future expansion.
6. Zone 2 Audio Output Connectors
Provide analog audio output in Zone 2. Two stereo connectors
labeled Audio L/R are available. The connector labeled Fix
passes audio at fixed output levels. The connector labeled Var
passes audio at variable output levels and includes a built-in
volume control.
7. Record Zone Audio Output Connectors
Provide analog and digital audio output in the Record Zone.
Two stereo connectors labeled Audio L/R are available for
analog audio output. The connector labeled Fix passes audio at
fixed output levels. The connector labeled Var passes audio at
variable output levels and includes a built-in volume control.
Two S/PDIF connectors (one coaxial and one optical) are
available for digital audio output.
Alternatively, these connectors can be used to connect a
recording device. When the Record Zone audio output
connector labeled Var is sent to a recording device, it is
recommended to set the VOLUME CONTROL SETUP menu
REC PWR ON parameter to +0dB to achieve appropriate
recording levels. The Record Zone audio output connector
labeled Var passes audio at variable output levels. Adjusting
Record Zone volume level will affect the recording.
8. Audio Output Connectors
Provide analog audio output in the Main Zone and Zone 2.
Ten connectors labeled Front L/R, Center, LFE, Subwoofer L/R,
Side L/R, and Rear L/R are available in the Main Zone. The con-
nectors labeled Aux L/R are provided for future expansion. Two
connectors labeled Zone 2 L/R are available in Zone 2.
9. Video Input Connectors
Provide video input in all zones. Five composite video connectors
labeled Video 1 to 5, eight S-video connectors labeled S-Video
1 to 8, and four component video connectors (three RCA and
one BNC) labeled INPUT 1 to 4 are available. The component
video connectors are not available for the Record Zone.
. . . Rear Panel Overview continues on page 2-8