JBL SDP-40 Stereo System User Manual


 
MODE ADJUST
SDP-40
5-19
5.1 MUSIC
Designed for playback of 5.1-channel Dolby Digital music
sources.
The 5.1 MUSIC listening mode is not available unless both
side and rear speakers are present.
Applies ASA processing to signals sent to the rear speakers.
Refer to the ASA parameter description on page 3-31 for more
information.
Recommended for home theaters.
Default Possible
Parameter Setting Settings
COMPRESSION OFF AUTO, ON, OFF
LFE MIX +0.0dB -10.0 to +0.0dB
OUTPUT LEVELS Refer to page 5-32
CUSTOM Refer to page 5-33
Listening mode menu parameter descriptions begin on page 5-34.
Note:
The 5.1 MUSIC listening mode can only be
activated with the front panel or remote control
Mode buttons.
5.1 @** MUSICMODE ADJUST
DIGITAL EX & DIGITAL
Listening mode name differs depending on the encoding present
in the input source, the EX DECODING parameter setting, and the
speaker setup. The table at the bottom of the next page indicates
the conditions in which Dolby Digital Surround EX decoding is
engaged.
The DIGITAL EX listening mode is available when Dolby
Digital Surround EX decoding is engaged.
•Dolby Digital Surround EX decoding is engaged when the EX
DECODING parameter is set to ON or when the EX DECODING
parameter is set to AUTO and a flagged 5.1-channel Dolby
Digital source recorded with Dolby Digital Surround EX
encoding is detected.
The DIGITAL EX listening mode is not available unless both
side and rear speakers are present.
The DIGITAL listening mode is available when Dolby Digital
Surround EX decoding is not engaged.
•Dolby Digital Surround EX decoding is not engaged when the
EX DECODING parameter is set to OFF or when the EX
DECODING parameter is set to AUTO and a non-flagged
5.1-channel Dolby Digital source recorded with or without
Dolby Digital Surround EX encoding is detected.
. . . DIGITAL EX & DIGITAL continues on page 5-20
@*DIGITAL
OR
@*DIGITAL EXMODE ADJUST