JBL SDP-40 Stereo System User Manual


 
Getting Started
JBL
1-4
INSTALLATION CONSIDERATIONS
The SDP-40 requires special care during installation to ensure
optimal performance. Pay particular attention to the bulleted items
that begin below and to other precautions that appear throughout
this user guide.
DO
Install the SDP-40 on a solid, flat, level surface such as a table ,
shelf, or in a standard 19-inch equipment rack using the
enclosed rack-mount kit.
Select a dry, well-ventilated location out of direct sunlight.
DO NOT
Expose the SDP-40 to high temperatures, humidity, steam,
smoke, dampness, or excessive dust. Avoid installing the SDP-
40 near radiators and other heat-producing appliances.
Install the SDP-40 near unshielded TV or FM antennas, cable TV
decoders, and other RF-emitting devices that might cause
interference.
DO NOT (continued)
Place the SDP-40 on a thick rug or carpet or cover the SDP-40
with a cloth, as this might prevent proper cooling.
Place the SDP-40 on a windowsill or in another location in
which it will be exposed to direct sunlight.
Obstruct the front panel IR receiver. When the SDP-40 is not
using the rear panel IR IN connector, the remote control must
be in line-of-sight with the IR receiver for proper operation.
Before moving the SDP-40, make sure it is powered off with
the rear panel power switch. Then, make sure the power cord
is unplugged from the wall outlet.
CAUTION