Filter
Top Products
80 HP Digital Entertainment Center
One Cable TV Box or Digital Cable Receiver
Connect the TV signal source from the Cable TV
set-top-box or digital cable receiver (not provided) into
the HP Digital Entertainment Center.
If you are using a set-top-box or digital cable receiver
with S-video or composite video output, do the following:
1 Make sure that a coaxial cable connector from your
cable TV source (wall) is plugged into the set-top-box
or digital cable receiver In connector.
2 Connect a video cable:
a Choose a video out connector:
■ Coaxial (RF)
■ Video (composite)
■ S-video
b Connect the video cable from the set-top-box or
digital cable receiver back panel Video Output
connector.
c Connect the video cable into the HP Digital
Entertainment Center back panel TV Source 1 In
connector.
3 Connect stereo audio cables (skip this step if using
coaxial [RF]):
a From the set-top-box or digital cable receiver
back panel Audio Out right (red) and Audio Out
left (white) connectors.
b Into the HP Digital Entertainment Center back
panel TV Source 1 In Audio right (red) and Audio
left (white) connectors.
4 Connect the set-top-box Infrared Transmitter cable
(required for signal). See “Infrared Transmitter
Connection” on page 88.