Filter
Top Products
Initial Configuration 135
Initial Configuration
Viewing the screen image on a second display
To view your HP Digital Entertainment Center screen
image on a second TV or monitor:
1 Make sure the video and audio cables are
connected before you turn on the TV and the
HP Digital Entertainment Center.
2 Turn on the TV. Press the Video/TV button on the
TV remote control to select the Video input.
3 Turn on the HP Digital Entertainment Center.
4 Press Media Center on the remote control.
You can also click Start on the taskbar, and
select Media Center.
5 Click More Programs, HP Settings, and then
Resolution. The Display Settings window opens.
6 Click Advanced button. The Display Properties
window opens.
7 Click Settings.
8 Click the Advanced button.
9 Click the Displays tab.
The monitors and TVs are shown. The upper-left
corner of each display icon is a button and a status
indicator. A red corner indicates an inactive display;
a green corner indicates an active display.
10 Select the screen.
■ Dual Screen: To view the display on your monitor
and TV simultaneously, click the upper-left corner
of the TV icon. It becomes green. Both the
monitor and the TV should have green corners.
Or
■ Single Screen: To view the display on just the TV,
click the TV corner. It becomes green. Then click
the monitor corner so it is red.
11 Click Apply.
12 When the HP Digital Entertainment Center image
appears on the TV screen, click Yes to keep the
setting. You have 15 seconds to accept this new
setting before it reverts to the previous setting.
13 Click the OK button to save changes. Click OK
again to close the Display Properties window.
n
You can also click on the Display Settings
shortcut on the desktop, or right-click an
empty area of the desktop and choose
Properties. The Display Properties window
opens. Click the Settings tab.