Filter
Top Products
Troubleshooting 143
Troubleshooting
Video
Find the description that most closely matches your
problem and try the corresponding solution.
Problem Solution
I am using a TV with
the HP Digital
Entertainment
Center, but I cannot
see anything.
■ Check that the correct input source is selected on the TV.
■ Check that the TV is connected to the HP Digital Entertainment Center. See “Video
Out to TV” on page 66.
■ Check that the TV Out image is enabled. See “Configuring Video” on page 134.
I cannot see
anything on the TV. I
can hear it, though.
■ If the Video Output S-video and composite connections are not connected to a TV
or Video Input when the HP Digital Entertainment Center is turned on, the S-video
and composite jacks will turn off automatically. You must turn off, by pressing and
holding down the power button for four seconds, and restart your HP Digital
Entertainment Center to ensure Video Out connection to your TV or AV receiver.
■ Check your input switches.
The HP Digital
Entertainment Center
doesn’t recognize
my digital video
camera.
See “Recognizing the camera” on page 105.