Filter
Top Products
64 HP Digital Entertainment Center
Using the Remote Control with Your TV
You can use the HP Digital Entertainment Center remote
control to change channels and adjust volume if you have
a cable box or satellite receiver, have installed the
Infrared Transmitter cable, and have configured the
remote control after initial power up.
Always point the HP Digital Entertainment Center remote
control at the HP Digital Entertainment Center front panel.
The infrared remote sensor, behind the front panel
window, receives signals from the remote control.
The HP Digital Entertainment Center includes one or two
Infrared Transmitter cables (IR blaster) that are required to
control one or two set-top-boxes. You must carefully
position the Infrared Transmitter cable tip on the set-top-
box to ensure the set-top-box receives the IR signal from
the HP Digital Entertainment Center. See “Infrared
Transmitter Connection” on page 88.