Filter
Top Products
48
About External Control
Cable
Innovator
(18) Serial transmission
terminal
The Audio levels of the "Innovator“ can be remotely controlled by connecting it to a
personal computer via a serial port. The microphone levels can be controlled independ-
ently, the auxiliary inputs are controlled as a single mixed signal.
●About connections
Connect the "CAE-100W" and the personal computer with a cable as shown below.
●Serial transmission connection (RS232C) specifications
The "INNOVATOR" specifications are shown below.
Signal Level Contents Description
Sync.method Asynchronous Synchronizes every 1 character (8 bits)
Baud rate 9600bps Data transfer speed
Parity None Error detection method
Character length 8bits Number of bit composing 1 character
Stop bit 1bit Uses stop bit when asynchronous method
Cable Type : Cross
Maximum Cable Length less than 15m (40 feet)
PIN NA ME PIN NA ME
1 N.C. (DCD) 6 N.C. (DSR)
2 RXD 7 N.C. (RTS)
3 TXD 8 N.C. (CTS)
4 N.C. (DTR) 9 N.C. (RI)
5 GND ---
●Information about Connectors
RXD
GND
TXD
1
9
2
4
5
3
6
7
8
[notes]
◎Contact your local representative for additional information on controlling
the Innovator from computer via the RS-232C input
Personal computer or
AV controller