Filter
Top Products
47
Setting the EMG Aux Mute
Caution : Wiring for the ENG Input are fixed to the screw terminals.
The torque for the screws is 0.98 N・m±0.1 N・m (10 kgf・cm±1 kgf・cm)
Muting of auxiliary
input starts
Muting finished when
inputs turned off
Time
Volume
Auxiliary Input
Level
Auxiliary input
levels reduced by
12 dB
Auxiliary Input volume re-
turns to original level after
approximately 2 seconds
(Continued from previous page)
The mute function works as shown below:
Be sure to switch the amplifier off before connecting the wires.
Carefully check the polarities before connecting it. Connection to the
wrong polarity will cause trouble.
Screw terminals