Filter
Top Products
44
Setting the PA Aux Mute
Caution : Wiring for the PA Input are fixed to the screw terminals.
The torque for the screws is 0.98 N・m}0.1 N・m
(10kgf・cm}1 kgf・cm)
Be sure to switch the amplifier off before connecting the wires.
Carefully check the polarities before connecting it. Connection
to the wrong polarity will cause trouble.
Screw terminals
Muting of auxiliary input
Mute finished when
inputs turned off
Time
Volume
Auxiliary Input
Level
Auxiliary input
levels reduced by
12 dB
Auxiliary Input
volume returns
to original level
after approximately
10 seconds
(Continued from previous page)
The mute function works as shown below: