Filter
Top Products
26
Operating Controls
EDS-07 IR SENSOR
1
3 4
2
5
Rear View
Front View
(1) Infrared sensor cover
Protects sensor and allows IR light to enter. – Power supplied by the receiver.
(2) Sensor connection terminal
Provides connection to the sensor input terminal of the infrared wireless receiver
via F-connectors and coaxial cable. Power for the sensor is supplied from the receiver
through the coaxial cable.
(3) Frequency selection switch ［1/2, 3/4］
Switches between [1/2]: 1ch and 2ch or [3/4]: 3ch and 4ch by changing the recep-
tion frequency.
(4) Power indicator
* Lights "green" when the frequency switch is set to [A], 1 and 2 ch.
* Lights "orange" when the frequency switch is set to [B], 3 and 4 ch.
(5) Anchor strap
Attached to the coaxial cable to prevent the sensor from falling.