Filter
Top Products
64
C (OFF)
E
C (OFF)
E
E
C (OFF)
C (OFF)
C (OFF)
C (OFF)
C (OFF)
C (OFF)
C (OFF)
C (OFF)
C (OFF)
C (OFF)
C (OFF)
C (OFF)
C (OFF)
C (0dB)
E
C (0dB)
E
E
C (0dB)
C (0dB)
C (0dB)
C (0dB)
C (0dB)
C (0dB)
C (0dB)
C (0dB)
C (0dB)
C (0dB)
C (0dB)
C (0dB)
C (0dB)
2 Surround modes and parameters
C : Signal / Adjustable
E : No signal / Not adjustable
B : Turned on or off by speaker configuration setting
C : Able
E : Unable
Channel output
FRONT L/R
CENTER
SURROUND
L/R
SUB-
WOOFER
SURROUND
BACK L/R
PURE DIRECT, DIRECT
MULTI CH DIRECT
STEREO
EXTERNAL INPUT
MULTI CH IN
WIDE SCREEN
HOME THX CINEMA
DOLBY PRO LOGIC II
DOLBY DIGITAL
DTS SURROUND
DTS NEO:6
5/7CH STEREO
SUPER STADIUM
ROCK ARENA
JAZZ CLUB
CLASSIC CONCERT
MONO MOVIE
MATRIX
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
E
B
E
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
E
B
E
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
E
B
E
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
Mode
D. COMP LFE AFDM
SB CH OUT
(MODE)
E
E
E
E
E
E
C
C
C
C
C
E
E
E
E
E
E
E
E
C
E
E
C
C
C
C
C
C
C
C
C
C
C
C
C
C
Parameter (default values are shown in parentheses)
When playing Dolby Digital and DTS signals
Signals and adjustability in the different modes
Surround parameters t
EFFECT:
This parameter turns the effect signals with multi surround mode speaker effects on and off in the WIDE SCREEN mode. When this parameter
is turned off, the SBL and SBR channel signals are equivalent to the SL and SR channels, respectively.
LEVEL:
This parameter sets the strength of the effect signals in the WIDE SCREEN mode. It can be set in 15 steps, from “1” to “15”. Set this to a
low level if the positioning or phase of the surround signals sounds unnatural.
SB CH OUT:
“ON”..................Playback is conducted using the surround back speaker.
“OFF”.................Playback is conducted without using the surround back speaker.
NOTE: This operation can be performed directly using the “6.1/7.1 Surround” button on the main unit’s panel.
ROOM SIZE:
This sets the size of the sound field.
There are five settings: “small”, “med.s” (medium-small), “medium”, “med.l” (medium-large) and “large”. “small” recreates a small sound
field, “large” a large sound field.
EFFECT LEVEL:
This sets the strength of the surround effect.
The level can be set in 15 steps from 1 to 15. Lower the level if the sound seems distorted.
DELAY TIME:
In the matrix mode only, the delay time can be set within the range of 0 to 300 ms.
TONE CONTROL:
This can be set individually for the separate surround modes other than Direct and Home THX Cinema.