Filter
Top Products
34
Setting the Digital Multi Ch In
1
Select “Digital Multi Ch In” on the System Setup
Menu screen, then press jog stick “ENTER”.
3
Digital Ext. In setting :
This is set for the Digital Ext. In input using the Coaxial 1 to 4 inputs.
4
Enter the setting.
The System Setup Menu reappears.
Select “Digital Ext.In” (using the up and down cursor buttons) then select
ON or OFF (using the left and right jog stick).
When set to “ON”, the four terminals (Coaxial 1 to 4) are assigned to the
desired input source as a single digital multichannel input.
When set to “OFF” the four terminals (Coaxial 1 to 4) are assigned to
individual input sources.
DENON Link setting :
Set this when connecting a Denon DVD player using the Denon Link terminal.
Set to “ON” if you want to use the terminal, “OFF” if you do not want to use it.
Select “DENON Link” (using the up and down cursor
buttons) then select ON or OFF (using the left and
right jog stick).
When set to “ON”, also set the playback input when there is no digital signal.
ANALOG: The analog input of the input source assigned to Denon Link is played.
EXT-1: The EXT.IN-1 input is played.
EXT-2: The EXT.IN-2 input is played.
NOTE:
• When playing using the DENON LINK terminal, also connect the analog external input terminal (EXT-1) (see page 12) and set the “No
Digital Signal” setting to “EXT-1”.
2
To set, select “Yes” and press jog stick “ENTER”.
When “ON” was selected at “Digital Ext. In”, set the surround back channel input.
If you do not want to use the surround back channel...........NOT USED
If you do want to use the surround back channel, set according to the specifications of the connected player.