Filter
Top Products
• With this set it is possible to record Dolby Digital and DTS
multichannel signals converted into 2-channel analog signals.
• The recording signals are output to the MULTI ZONE-2 OUT,
TAPE and VCR output terminals.
• Down-mixed analog signals converted into digital signals are
output from the OPTICAL 5 and 6 digital output terminals at this
time.
42
Multi-source recording/playback
[1] Playing one source while recording another (REC OUT mode)
1
Press the REC/M-ZONE 2 button until
“RECOUT ✽✽✽✽” appears on the set’s
display.
REC /
M-ZONE 2
2
Select the source you want to record
appears on the set’s display.
• The indicator for the selected
program source lights.
FUNCTION
3
Set the recording mode.
• For operating instructions, refer to the manual of the
component on which you want to record.
4
To cancel, press the REC/M-ZONE 2 button twice. Then
select “M-ZONE2 SOURCE”.
[2] Recording Dolby Digital and DTS multichannel sources
1
Press the REC/M-ZONE 2 button until “RECOUT ✽✽✽✽”
appears on the display. Then select “RECOUT SOURCE”.
2
Set the input mode according to the
source to be played.
INPUT
MODE
(Main unit)
3
Set the surround mode by pressing the DIRECT or STEREO
button.
• The multichannel digital signals are down-mixed and output
to the TAPE and VCR output terminals.