Filter
Top Products
30
Setting the Video Input Mode
• Select the input signal to be output from the video monitor output terminal. (For details, refer to page 81.)
1
At the System Setup Menu select “Video Input Mode”.
2
Switch to the Video Input Mode screen.
Setting the Audio Delay
This function allows you to adjust the time delay of the video and audio signals and store these settings for the different input sources.
The setting is made while watching a DVD or other software, so it is not made here.
By default, this is not displayed when no digital signals are being input.
For instructions on making the setting, refer to page 56.
3
q Select the input source for which you
want to set the Video Input Mode.
w Select the mode.
AUTO: When there are multiple input signals, the input signals are detected and the input signal to be output from the video
monitor output terminal is selected automatically in the following order: component video, S-Video, composite video.
Component: The signal connected to the component video terminal is always played.
Video conversion is not conducted, so no image is output from the monitor output terminal when there is no input signal
to the component terminal.
Only DVD, TV and DBS can be selected.
S-Video: ideo: ideo: