Filter
Top Products
31
Setting the Multi Zone Control
The AVR-5803 is equipped with two sets of multi-zone outputs.
Multi-zone 1 is a pre-output with an output level adjustment function.
Multi-zone 2 is a fixed output level pre-output. Using the power amplifier assignment function described below, it is also possible to connect
speakers to the multi-zone 2 speaker terminals.
1
At the System Setup Menu, select “Multi Zone Control”.
2
Press jog stick “ENTER” to switch to the “Multi Zone Control” screen.
[1] Setting the multi-zone 1 vol. level
3
Select “Multi Zone1 Vol. Level” then press jog stick “ENTER”.
4
Select the desired setting, then press jog stick “ENTER”.
Variable:
The level can be adjusted freely using the buttons on the remote control unit (M. ZONE 1 4/5,
VOLUME UP and VOLUME DOWN).
-40 dB, 0 dB:
The output level is fixed at the set level and the volume can no longer be adjusted.
Make this setting to switch the power amplifier for the surround back channel to Multi-zone 2.
[2] Power amplifier assignment function setting
1
At the System Setup Menu, select “Multi Zone Control”.