Filter
Top Products
62
DSP surround simulation
1
Select the surround mode for the input channel.
DIRECT STEREO
DOLBY
SURROUND
DTS
SURROUND
WIDE
SCREEN
5CH / 7CH
STEREO
DSP
SIMULATION
SURROUND MODE
(Main unit)
The surround mode switches in the following order each time
the DSP SIMULATION button is pressed:
1
2
Display the surround parameter screen on the monitor.
The screen for the selected surround mode appears.
NOTES:
• When “Default” is selected and the jog stick is moved to the left, “CINEMA EQ.” and “D. COMP.” are automatically set to “OFF”. In
addition, “ROOM SIZE” is set to “medium”, “EFFECT LEVEL” to “10” and “DELAY TIME” to “30ms”.
• The “ROOM SIZE” expresses the expansion effect for the different surround modes in terms of the size of the sound field, not the actual
size of the listening room.
WIDE SCREEN SUPER STADIUM ROCK ARENA
JAZZ CLUB CLASSIC CONCERT
MONO MOVIE
MATRIX
3
Press the CURSOR/PAGE button to highlight the
display, then use the jog stick to set the parameters.
4
Press the CURSOR/PAGE button so that the display is no longer highlighted,
then press the “SURR. PARA” button to complete the setting.
(Remote control unit)
(Remote control unit)
(Remote control unit)
3
2, 4
11
WIDE SCREEN is not displayed when the operation is
performed with the button on the main unit.