Filter
Top Products
88
Advanced Operation
Setting the brightness
• The brightness of the display can be adjusted in 5 levels.
• The default brightness setting is level 3 (level 5 = brightest).
NUMBER
RC SETUP
IR segment
MODE SELECTOR
CHANNEL
SYSTEM CALL
Resetting
¢
Resetting the single learned button
¢ Resetting the learned buttons
1
Press and hold the RC SETUP button for at
least three seconds.
• The IR segment blinks twice.
2
-1
For 1 brightness step increase:
Press the
CHANNEL + button.
3
Press and hold the RC SETUP button to exit
programming.
• The IR segment twice as confirmation.
2
-2
For 1 brightness step increase:
Press the CHANNEL – button.
1
2
3
Press the MODE SELECTOR button.
Press and hold the
RC SETUP button for at
least three seconds.
• The IR segment blinks twice.
Press the 9, 7, 6 button (9
→
7
→
6).
• The IR segment blinks twice.
4
Press the learned button you want to reset
twice.
• The IR segment blinks twice.
Other key can be deleted by repeating steps 1 to 4.
1
2
3
Press the MODE SELECTOR button you want to
reset twice.
• The IR segment blinks twice.
Press and hold the RC SETUP button for at
least three seconds.
• The IR segment blinks twice.
Press the 9,
7, 6
button (9
→
7
→
6).
• The IR segment blinks twice.
¢
Resetting the system call buttons
1
2
3
Press the SYSTEM CALL button (1 to 3) you
want to reset.
Press and hold the
RC SETUP button for at
least three seconds.
• The IR segment blinks twice.
Press the 9, 7, 8 button (9
→
7
→
8).
• The IR segment blinks twice.
4
Press and hold the RC SETUP button for at
least three seconds to clear the system call.
• The IR segment blinks twice.