Filter
Top Products
PageDefault settingsAdvanced Playback
Video Setup PageDefault settings
Audio Input Setup PageDefault settings
139
Advanced Setup – Part 2
3. Audio Input Setup
99, 100
Digital In
Assign
This assigns the digital input terminals for the
different input sources.
Input
source
Digital
Inputs
CD DVD VDP TV DBS VCR-1 VCR-2
COAX 1 COAX 2 COAX 3 OPT 1 OFF OPT 2 OPT 3
1
CDR /
TAPE
OPT 4
VCR-3
OFF
V.AUX
OPT 5
2 EXT.IN Setup Set the Ext.In terminal playback method.
Surr.Sp = Surr.A, SW Level = +15dB
101
Input
Function Lev.
The playback level is corrected individually for the different
input sources.
TUNER PHONO CD
CDR /
TAPE
DVD VDP TV
0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB
3
VCR-2
0 dB
DBS VCR-1
0 dB 0 dB
VCR-3
0 dB
V.AUX
0 dB
4
Function
Rename
The names of the different input source can be changed as
desired and displayed on the display.
101, 102
5
IEEE1394
Assign
The connected IEEE1394 device can be automatically
identified to assign the input source.
– 102
6
IEEE1394
Auto Func.
Set the function for associating playback of the connected
IEEE1394 device on or off.
Auto Function = OFF 103
7
Tuner
Presets
FM stations are received automatically and
stored in the memory.
A1 ~ A8
B1 ~ B8
C1 ~ C8
D1 ~ D8
E1 ~ E8
87.5/89.1/98.1/107.9/90.1/90.1/90.1/90.1 MHz
520/600/1000/1400/1500/1710 kHz, 90.1/90.1 MHz
90.1 MHz
90.1 MHz
90.1 MHz
Auto
Preset
Memory
F1 ~ F8
G1 ~ G8
90.1 MHz
90.1 MHz
Preset channels that are not used often can be
skipped.
Preset
Skip
The preset channels can be given the names
you want.
Preset
Name
103
All preset channels = OFF 104
– 104, 105
100
TUNER PHONO CD
CDR /
TAPE
DVD VDP TV VCR-2DBS VCR-1 VCR-3 V.AUX
5. Advanced Playback
1
2
2ch
Direct/Stereo
Auto
Surround
Mode
Turn the audio compression on or off when down-mixing
Dolby Digital signals.
3
Dolby Digital
Setup
The speaker settings can be changed specifically for
playing in the 2-channel direct or stereo mode.
Set the Auto surround mode function.
Basic
OFF
Auto Surround Mode = ON
111
112
112
4
This parameter is for optimizing the Room EQ with which
the audio signals are produced from the speakers.
Manual EQ
Setup
All Channels and Frequency = 0 dB 113, 114
4. Video Setup
2
Component
In Assign
HDMI/DVI In
Assign
This assigns the component video input terminals for the
different input sources.
The HDMI or DVI input terminals are assigned for the
different input sources.
Select the HDMI audio signal playback method.
DVD VDP TV
1
107
3
Video Convert
Mode
This sets whether or not to use the video conversion
function.
ON 107
106, 107
DBS VCR-1 VCR-2 VCR-3 V.AUX
1-RCA 2-RCA 3-RCA NONE NONE NONE NONE NONE
Audio Delay
Set the audio delay timing to synchronize the sound and
video.
5
0 ms 109
On Screen
Display
This sets whether or not to display the on-screen display
that appears on the monitor screen when the controls on
the remote control unit or main unit are operated.
6
Function/Mode = ON, Master Volume = ON, Mode = Mode 1 110
DVD VDP TV DBS VCR-1 VCR-2 VCR-3 V.AUX
NONE NONE NONE NONE NONE NONE NONE NONE
4
HDMI Out
Assign
This sets whether or not to use the function for converting
analog video (composite video, S-Video or component
video) signals into HDMI signals.
When using this conversion function, set the aspect ratio,
set the resolution, set the color format and video range of
the signals output from the HDMI terminal.
Convert = ON
Aspect = Full
Resolution = 480p/576p
Color Space = Y Cb Cr
RGB Mode = Normal
108, 109
AUX
0 dB
Net
Audio