Filter
Top Products
123
Advanced Setup – Part 1
Network Setup
• If you are using a broadband router (DHCP function), there is no need to make the settings at “Setting the IP Address” and
“Setting the Proxy”, since the DHCP function is set to “ON” in the AVR-4806CI’s default settings.
• If the AVR-4806CI is being used connected to a network without the DHCP function, the network settings must be made. In
this case, some knowledge of networks is required.
• Set this when “OFF” is set for “DHCP”.
1
Press the CURSOR
DD
or
HH
button to select
“Network Setup” at the “System Setup
Menu”, then press the
ENTER button.
• The “Network Setup” screen appears.
2
Press the CURSOR
DD
or
HH
button to select “IP
Address”, then press the
ENTER button.
• The “IP Address” screen appears.
3
Press the CURSOR
FF
or
GG
button to select
“OFF”.
• The DHCP function is disabled.
Setting the IP Address
4
Press the CURSOR
DD
or
HH
button to select the
desired setting item, then press the
CURSOR
GG
button and CURSOR
DD
or
HH
button to input
the address.
IP Address:
Set the IP address within the ranges shown below.
The Network Audio function cannot be used if
other IP addresses are set.
CLASS A: 10.0.0.0 ~ 10.255.255.255
CLASS B: 172.16.0.0 ~ 172.31.255.255
CLASS C: 192.168.0.0 ~ 192.168.255.255
Subnet Mask:
When connecting an xDSL modem or terminal
adapter directly to the AVR-4806CI, input the subnet
mask indicated in the documentation supplied by
your provider. Normally input 255.255.255.0.
Gateway:
When connected to a gateway (router), input its IP
address.
Primary DNS / Secondary DNS:
If there is only one DNS address indicated in the
documentation supplied by your provider, input it at
“Primary DNS”. If there are two or more DNS
addresses, input the first one at “Second DNS”.
5
Press the ENTER button to enter the setting.
• The “IP Address” menu reappears.
• DHCP (Dynamic Host Configuration Protocol):
These are systems by which the IP address and other
network settings are automatically set for the AVR-4806CI,
computer, broadband router and network devices.
• DNS (Domain Name System):
This is a system for converting the domain names used
when browsing Internet sites (for example,
“www.denon.jp”) into the IP addresses actually used for
communications (for example, “202.221.192.106”).