Filter
Top Products
56
Basic Operation
Dolby Pro Logic
II
x (Pro Logic
II
) mode
•To play in the PLIIx mode, set “Sp.Back” at the Speaker
Configuration setting to “1spkr” or “2spkrs”.
•To play in the PL
IIx mode, set “Surround Back” at the Power
Amp Assign setting.
• This mode is optimal for playing program sources recorded
in Dolby Surround.
1
Press the STANDARD button to select “Dolby
Pro Logic IIx” mode.
• The Dolby Pro Logic indicator
lights.
The mode switches as shown
below each time the STANDARD
button is pressed.
lights
DTS NEO:6DOLBY PLIIx
3
Press the SURROUND PARAMETER button.
• Display the “Surround Parameter” menu.
2
Play a program source .
For operating instructions, refer to the manuals of the
respective components.
4
Press the CURSOR
FF
or
GG
button to select the
play mode.
When the “SB CH OUT” parameter is set to “ON”.
(Set “SP.Back” at the System Setup to “1spkr” or
“2spkrs”).
Display
MODE: PL x C
*Surr Parameter
MODE: PL x M
*Surr Parameter
MODE: PL x G
*Surr Parameter
(Pro Logic IIx Cinema
mode)
(Pro Logic IIx Music
mode)
(Pro Logic
IIx Game
mode)
When the “SB CH OUT” parameter is set to “OFF”.
(Set “SP.Back” at the System Setup to “None”).
Display
MODE: PL C
*Surr Parameter
MODE: PL M
*Surr Parameter
MODE: PL G
*Surr Parameter
*Surr Parameter
MODE: DOLBY PL
(Pro Logic II Cinema
mode)
(Pro Logic II Music mode)
(Pro Logic II Game mode)
(Dolby Pro Logic mode)
SURROUND
PARAMETER
STANDARD
ENTER
CURSOR
CURSOR
SURROUND
PARAMETER
ENTER
STANDARD