Filter
Top Products
120
Advanced Setup – Part 1
ZONE2 and ZONE3 tone control and
channel level setting
• Adjust the sound output from ZONE2 and ZONE3.
1
Press the CURSOR
DD
or
HH
button to select
“Zone2/3 Tone/Ch Lev.” at the “Option Setup”
menu, then press the
ENTER button.
• Display the “Zone2/3 Tone/Ch Lev.” screen.
2
Press the CURSOR
DD
or
HH
button to select the
zone whose sound you want to adjust (ZONE2,
ZONE3), then press the
ENTER button.
•Switch to the setting screen.
Example: When “Zone2” is selected
3
Press the CURSOR
DD
or
HH
button to select the
item to be set, then press the
CURSOR
FF
or
GG
button to adjust the parameter.
Bass:
Adjust the tone for the bass.
Channel Level:
Set so that the playback level is the same for the
left and right channels. (The volume can adjusted
between –12 dB and +12 dB in steps of 1.0 dB.)
Treble:
Adjust the tone for the treble. (The bass or treble
sound can be adjusted between –12 dB and +12
dB in steps of 2.0 dB.)
HPF:
Set this to “ON” if your speakers do not have a
very strong capacity for producing low bass. Using
the high pass filter makes it possible to reduce
distortion of the bass sound.
Press the ENTER button.
• Return to the “Zone2/3 Tone/Ch Lev.” screen.
Use the same procedure to make the settings for
ZONE3.
4
• The “Channel Level” setting is only possible when ZONE2
or ZONE3 is set to “Stereo” in the “Channel Setup” menu.
Press the CURSOR
DD
or
HH
button to select
“Exit”, then press the
ENTER button.
• The “Option Setup” menu reappears.
5