Filter
Top Products
62
Basic Operation
SURROUND
PARAMETER
CURSORDSP SIMULATION
ENTER7CH STEREO
DSP SIMULATION
7CH STEREO
CURSOR
SURROUND
PARAMETER
ENTER
DSP surround simulation
1
Select the surround mode for each input
channel.
Example: DSP surround simulation mode
The surround mode switches in the following order
each time the DSP SIMULATION button is pressed:
(Remote control unit)
Example: 7CH STEREO mode
WIDE SCREEN
JAZZ CLUB
SUPER STADIUM
ROCK ARENA
MATRIX
VIDEO GAME
CLASSIC CONCERT
MONO MOVIE
2
Press the SURROUND PARAMETER button.
•Display the surround parameter menu.
3
Press the CURSOR
DD
or
HH
button to select the
various surround parameters.
5
Press the ENTER or SURROUND PARAMETER
button to complete the setting.
4
Press the CURSOR
FF
or
GG
button to adjust the
parameters setting.
SURROUND BACK SPEAKER
ON
OFF
DISPLAY
7CH STEREO
5CH STEREO
The screen for the selected surround mode appears.
• The “7CH STEREO” display changes as shown below
according to the surround back speaker setting.
•When “Default Yes” is selected and the CURSOR
FF
button is
pressed, “CINEMA EQ.” and “D.COMP.” are automatically
turned off, “ROOM SIZE” is set to “medium”, “EFFECT
LEVEL” to “10”, “DELAY TIME” to “30 ms” and “LFE” to
“0 dB”.
• The “ROOM SIZE” expresses the expansion effect for the
different surround modes in terms of the size of the sound
field, not the actual size of the listening room.
(Main unit)
(Remote control unit)(Main unit)