Filter
Top Products
105
Advanced Setup – Part 1
4
Repeat step 3 to input the preset channel
name.
To reset the input source name to the default value,
press the CURSOR
FF
or
GG
button to highlight the input
source display, then press the CURSOR
HH
button
.
When “Default Yes” is selected, then press the
CURSOR
FF
button to reset to the default name.
5
Once all the characters have been input, press
the
ENTER button.
• The “Preset Name” screen reappears.
Use the same procedure to change other input station
names as well.
6
When the CURSOR
HH
button is pressed at the
very bottom of the screen.
• The screen for the next preset memory block
appears.
It is also possible to select the desired preset memory
block by selecting “Block” then pressing the CURSOR
FF
or
GG
button.
Press the ENTER button to enter the setting.
• The “Audio Input Setup” menu reappears.
8
Press the ENTER button.
• Return to the “Tuner Presets” screen.
7
Press the CURSOR
DD
or
HH
button to select
“Exit”, then press the
ENTER button.
•The “System Setup Menu” reappears.
9