Denon AVR-4806CI Stereo System User Manual


 
58
Basic Operation
5
Press the CURSOR
DD
or
HH
button to select the
various surround parameters.
7
Press the ENTER or SURROUND PARAMETER
button to complete the setting.
6
Press the CURSOR
FF
or
GG
button to adjust the
parameters setting.
•When “Default Yes” is selected and the CURSOR
FF
button is
pressed, “MODE” and “TONE” are automatically reset to
the default values and “CINEMA EQ.” is set to “OFF”.
When playing PCM digital signals or analog signals in the
DOLBY PRO LOGIC
II, DOLBY PRO LOGIC IIx, DTS NEO:6
modes and the input signal switches to a digital signal
encoded in Dolby Digital, the Dolby Surround mode switches
automatically. When the input signal switches to a DTS
signal, the mode automatically switches to DTS surround.
DTS NEO:6 mode
Surround playback can be performed for the analog input and
digital input 2-channel signals.
1
Press the STANDARD button to select “DTS
NEO:6” mode.
The DTS NEO:6 indicator lights.
The mode switches as shown
below each time the STANDARD
button is pressed.
lights
DTS NEO:6DOLBY PLIIx
2
Play a program source.
3
Press the SURROUND PARAMETER button.
Display the “Surround Parameter” menu.
4
Press the CURSOR
FF
or
GG
button to select the
play mode.
SURROUND
PARAMETER
STANDARD
ENTER
CURSOR
PHONES
CURSOR
SURROUND
PARAMETER
ENTER
STANDARD