Filter
Top Products
43 of 80
5.0 Using FreeSpace
®
Installer™ Software
5.6 Service Hardware mode
The Service Hardware mode provides a list of any system errors
that have occurred.
To view the Error Log, click the Service Hardware button. If you
are already connected to hardware, the Error Log is retrieved
from the hardware and displayed in the window. If not yet con-
nected, select the hardware in the System Overview pane and
after establishing the connection, click (Detect Hardware)
and then click .
When the FreeSpace E4 system is powered on, it performs a self-
test. Any errors detected during a power-on cycle are appended
to the Error Log. Likewise, any errors detected during normal
operation are appended to the Error Log. The Error Log provides
diagnostic information for repair technicians to help them repair
the system.
For more information on reported errors, see “FreeSpace
®
E4
system error log” on page 65.
The buttons below the Error Log display allow you to manage the
Error Log information:
Uploads the current Error Log listing
from the hardware. If you recently
cleared the log, the Error Log will con-
tain information reported only since the
time you cleared it.
Exports the Error Log to your hard
drive as a text file.
Clears the Error Log from the window
and the E4 hardware.
Hardware version
numbers
Type of alarm
Name of test
Test results
Service Hardware button
Error Log