Bose CD Player CD Player User Manual


 
Function
use when...
! ............._ To use the nap timer
To adjust the snooze time
To test the alarm volume
To set AM/PM {12 hour) or Mi|itary (24 hour) time
system is on or off
see page 16
inalarm setup mode
see page 20
inalarm setup mode
see page 20
system is off
see page 15
To check backup battery power |evel
system is off
see page 22
To adjust the display brightness
system is off
see page 15
To turn the display on/off
system is off
see page 15
To check the volume setting
volume setting is not displayed
see page 15
hold
r_ae_/'sut,e
To check the CD time or radio station frequency
_e_fP_r,e
4
5.
display is in clock view or off
see pages 15, 17, 19
in play or pause mode
To display elapsed or remaining time for a track or disc
see page 19
To set continuous music in CD mode
see page 19
press To program a CD - You can program up to 32 CD tracks.
1. Place the selected disc in the CD player.
2. Press CD Stop m.
3. Hold down Alarm Setup and press CD Stop m. The display shows Pr01 to indicate
programming mode is ready for your first selection.
Use Track/Tune <_ or [::>to select a track.
Hold down Alarm Setup and press CD Mode _ to program this track. The program
counter shows Pr02 for the next selection.
Continue to select tracks (PRO&Pr04, etc.) until your list is complete.
To look through your programmed list, hold down Alarm Setup and press Track/Tune
<:_or [::::>.You can change an item while you are viewing it by following steps 4 and 5. To
add more items at the end of your list, re-program (step 5) the last entry to continue
adding selections.
8. Press CD Play I_ il to play the selected tracks once each. The programmed tracks are
shown with the PRESET icon lit.
9. To erase the program, press CD Mode _-_.
Note: Your program is saved until erased. The program plays all applicable track selec-
tions for any disc in the CD player.
7;ac_/Tune
6.
7.
7_c_/Tbn_
28