Filter
Top Products
Component
Portable tape player
CD changer, tape
deck, or VCR
Television or
computer
Bose®Lifestyle®
music system
®
\
Powered speakers
with volume
control
Connection at
Cable component
Connectien at
Wave Radio/CD Note
One minip!ug4o'
stereo audio cable
Headphone jack
AUX INjacks
For best sound, set
the player volume
control to approxi-
AUX
iN
mately 3/4of maximum
volume.
One stereo audio Audio output jacks
AUX INjacks
_@_ If there are two sets of
outputs (fixed andvariable), use fixed so
that the volume can
wabecontrolledfrOmveRadio/OD. the
@
R
4)
Use a standard RCA Audio output jacks AUX Njacks
You can record from your Wave®
Radio/CD using the connections from
the LiNE OUT jacks.
Tomake sure the sound seems to
cable for a TV with
stereo outPut jacks.
use a standard
adaptei foi aTV With a
sing!e (mono) audio
output jack.
You may need a special
adapter (SuCh as a
miniplug Stereo audio
Cable)fora TVWitha
headphone outlet.
If there are two sets of
outputs (fixed and
variable), use fixed so
that the volume can
be controlled from the
Wave Radio/CD.
AUX
IN
come from the screen, place the
Wave Radio/CD within a few feet of
the TV.If there is any interference
with the TV picture, move the Wave
Radio/CD farther away.
CAUTION: Toprevent interference
with the screen image, keep the
Wave Radio/CD at least 12inches
from the TV,a computer, or other
monitors.
Steieo cable With TAPE (REC)jacks
male4o,male RCA
plugs
}1 u_
AUX IN jacks _ux
®
4)
Use the audio input
cable that came with
YOUrspeakers:
Speaker system input
(as described in the
speaker owner's
manual)
LINE OUT jacks
LiNE
Lg
If your powered speaker audio input
cable has three connectors on each
end, use only the two connectors that
look alike to connect to the Wave
Radio/CD outputs. DO NOT USETHE
THIRD CONNECTOR.
Connecting speakers to the LINE OUT
jacks (fixed output) does not shut off
the Wave Radio/CD speakers, although
they can be MUTED while listeningto
the external speakers.
11